Cost and Benefits of 40’High Cube vs 40′ Standard Shipping Container


If you are confused between choosing a standard or a high cube container, you are at the right place. Selecting a container over the other completely depends on your requirements. We will discuss the suitability of each of these types today to help you make an informed decision.

The major difference between the two containers

The major difference between these two types is their height. The high cube container is a foot and a half taller than its standard counterpart. This gives you more space to work with. The other dimensions of these container types remain the same.

Benefits of 40′ Standard Shipping Container

With a short height, the standard container has less volume than the high cube one. It is also a lightweight option among the two. Here are a few benefits it offers over the others:

Lower energy consumption

Due to smaller internal areas, this container type consumes lower energy. It saves you a lot of money that goes into heating and cooling your house. The internal volume of a structure decides the temperature maintenance time. Less volume means less time to bring your home to your desired level of temperature.

Low transportation costs

The height of a container plays an important role in its safe transportation. Whenever you need to move your container from one place to another, you must pre-determine your route. Consider the path that does not have any obstruction in the form of low bridges or low power lines. This is possible with a standard container only due to the advantage of its shorter height. Also, lower weight translates to lower transportation costs.

Savings on container costs

A container that features a short height and has less space inside will cost you cheaper. You can expect to save anywhere between $500-1000 in terms of container cost. This might seem to be a small amount but building a house is not an easy job. There are so many expenses involved and such savings when calculated together can become huge amounts.

Savings in material costs

Material costs are incurred on a square foot basis. A foot and a half shorter height means much less use of material, both inside and outside. This leads to savings in terms of building material. You can expect to save around 15-20% of your material costs which is huge. Building material includes everything from insulating panels to drywall, adhesives to paints.

Benefits of 40ft. High Cube Container

The high cube container comes with some extra interior space. These are taller and bulkier than the standard containers.

Higher ceilings

The extra foot and a half add to the headroom for making your home a little more comfortable. You can have higher ceilings as the design adds to your elevation heights. This gives your tiny container house a little larger look.

Additional storage space

Since you get some more space on the top, you can fit in some more items there. The extra area provides you additional storage space for your things. It is always good to have more storage areas as we all have so many household items to store.

Space for plumbing/wiring lines

The additional height allows you to allocate some space to the plumbing or wiring lines. You can lift the floor a bit for plumbing depending on your design. The same goes for electrical wiring as well. The extra height can be used for the AC ducts or the water supply lines, depending on your requirements.

More comfortable

Shipping containers are small enclosed spaces that might not be too comfortable for some people. Additional height makes them more comfortable to live in. A little bit of more space and more interior elevation makes a great difference in these containers.

Comparison for Home Building:

Cost Comparison

A 40ft. new high cube shipping container costs around $5,900 whereas the standard one costs around $5,000 as new. You will get approximately $2,000-3,000 discount on a used container. So, you might get a used high cube container for $2,900 and a standard one for $2,000. You will have to consider the condition of these containers before comparing their prices.

The cost of the 40′ High Cube container is generally higher than the 40′ Standard container due to its extra height and volume capacity. However, the cost difference can vary depending on the location, availability, and condition of the containers. When considering the cost, it’s important to factor in other expenses such as transportation, modifications, and permits.


The primary difference between the 40′ High Cube and the 40′ Standard shipping container is the size. A 40′ Standard container is 8 feet 6 inches (2.59 meters) tall, while a 40′ High Cube container is 9 feet 6 inches (2.9 meters) tall. The additional height of the 40′ High Cube container provides an extra foot (0.3 meters) of vertical space, which can be beneficial for home-building projects that require higher ceilings or loft spaces. However, it’s important to note that the extra height of the 40′ High Cube container also means that it may be more difficult to find a location for it, especially in urban areas where there may be height restrictions.


When it comes to home building, the 40′ High Cube container is often preferred for its extra height. It can be used to create unique and spacious designs, such as mezzanine levels, lofts, and high ceilings. The 40′ Standard container, on the other hand, is still a viable option and is commonly used in home-building projects as well. It’s important to note that the size and configuration of the shipping container should match the specific design and needs of the home.


Both the 40′ High Cube and the 40′ Standard containers are readily available for home-building projects. However, the availability can vary depending on the location and demand. It’s essential to research and find a reputable supplier that can provide the specific type and number of containers required for the project.


The primary benefit of the 40′ High Cube container for home building is its additional height, which provides more vertical space for unique and spacious designs. The extra height can also improve ventilation, lighting, and insulation. However, it’s essential to consider the potential challenges of finding a suitable location and meet height restrictions.

The 40′ Standard container is a versatile option that can still be used in home-building projects. It’s a more common and affordable option that can be modified to meet the specific needs of the design. It’s important to note that the 40′ Standard container may not be suitable for designs that require higher ceilings or loft spaces.

Final Words

For some people, standard containers are suitable while for others high cubes are the best. Before selecting one over the other, you must consider the benefits they offer. Your housing needs and the above-listed container benefits will guide you through the process of selecting the right container.

Choosing between the 40′ High Cube and the 40′ Standard container for a home building depends on the specific design and needs of the project. The extra height and volume capacity of the 40′ High Cube container can provide unique and spacious designs, but it may come with additional costs and challenges. The 40′ Standard container is a reliable and versatile option that can still be modified to meet the specific needs of the design.

Shipping Container Home Cost

Leave a Comment

Your email address will not be published. Required fields are marked *